Anvil Monosuit

Anvil Monosuit

Forged Iron / S
$1,000.00
Skip to product information
Anvil Monosuit
ColorForged Iron
Size
Build: Relaxed

Size Guide

Measure XSSMLXL2XL
Note on Short Sizes: Selected gear is available in "Short" versions. These maintain the body measurements above but come with a 7.5 cm shorter inner leg.
Measure your body, not the gear Grab a tape and measure over your base layers to get an accurate starting point. These specs refer to your actual body size, not the dimensions of the garments. If you find yourself caught between two sizes, think about how you ride. Size up for a looser fit and extra room for layers, or size down for a tighter, technical feel.
Length

Your full height, boots off.

Chest

The widest part, right under the armpits.

Waist

Your natural waistline, where you usually bend.

Hip & Seat

The widest part with feet together.

Inner Leg

From crotch to floor. The inside track.

Arm

From shoulder tip down to the wrist bone.

Hand

Width across knuckles and length from wrist to middle finger tip.

The Builds

Relaxed

Built with a generous cut for the riders who like to layer up or just prefer that loose, slight oversized feel. It’s a "no-pinch" zone designed for ultimate mobility when you're wrestling a sled in the deep snow or wrenching under a hood.

Pro Tip: If you’re looking for a "cleaner" look for the local diner, size down.
Regular

The middle ground. It follows the natural lines of your body without being a tent or a wetsuit. It’s a versatile, honest cut that gets the job done in almost any situation, whether you're on the machine or off it.

Pro Tip: Check our chart and grab the size that matches. No need for guessing.
Lean

A more streamlined, closer cut designed to stay out of your way. We’ve removed the excess fabric so nothing slows you down, whether it’s a next-to-skin layer or a sharp shirt. It’s about keeping a clean profile without sacrificing your range of motion.

Pro Tip: If you’ve been hitting the buffet lately or just want a bit more breathing room, size up.

Expected delivery: End September

Bulk Order Table

+

The Essentials

The Anvil is the absolute heavy hitter of our lineup, built for the rider who spends their days wrestling through tight trees and deep powder. We didn’t just put reinforcements on the high-wear spots, we built the entire suit out of full-body Cordura. It’s a rugged, heavy-duty fortress designed to be the best piece of gear we could possibly put together.

The Nitty-Gritty

When you're out there in the backcountry, your gear is a tool, and the Anvil is the one you reach for when you need maximum protection. By using 195g/m2 Cordura Nylon for the whole shell, we've created a suit that handles everything you can put it through without breaking a sweat. It’s backed by a Sympatex 45k membrane, which works harder the more you move, keeping you dry while you're working the sled through technical terrain. We even added an expandable collar and chest vents so you can dump heat quickly when the riding gets intense.

The utility doesn't stop on the outside. Inside, we’ve included a full harness system to keep the suit sitting right, plus a clever neck loop that lets you drop the top half without it dragging in the snow when you’re taking a breather. For example, the waist Fidlock buckle with an integrated carabiner lets you easily hang your killswitch tether to your body when you’re stepping off the sled to help a buddy or scout a line. We also made sure your vitals are covered with a dedicated transceiver pocket and included EVA knee guards that sits behind the Kevlar reinforced knee panels, because we know those running boards can be unforgiving.

From the super heavy-duty zippers to the large cargo pockets that actually hold your gear, every inch of the Anvil is built for the long haul. It's not about looking flashy, it's about having a suit that’s as reliable as the tools in your workshop and built to be your go-to gear for many winters to come.

Under The Hood
  • Shell Construction: Full-body 195g/m2 Cordura® Nylon for ultimate abrasion resistance
  • Weather Protection: Sympatex® 45k membrane with dynamic breathability
  • Reinforcements: Genuine Kevlar® on knees, inner leg, and bottom leg hem
  • Main Hardware: Super heavy-duty zippers for main closure and leg pockets
  • External Zippers: YKK® Aquaguard® waterproof zippers on all external openings
  • Ventilation: Large chest ventilation zippers with mesh lining
  • Fidlock® Integration: Waterproof Fidlock® chest pocket and waist buckle with carabiner
  • Mountain Utility: Waist D-ring for tether
  • Collar: Adjustable and expandable collar with extra zip for added comfort
  • Hood: Removable hood with quick-release and multi-point adjustment
  • Leg Features: Full-length side zippers, boot gaiters with hook/loop, and rubber bottom hem adjustment
  • Internal Support: Integrated harness/suspenders and neck loop for "half-off" mode
  • Internal Protection: Included EVA knee guards with dedicated knee guard pockets
  • Safety Storage: Transceiver pocket with internal carabiner and secure phone pocket
  • Interior Finish: Upper body mesh for airflow; durable Nylon taffeta in arms and legs
  • Storage: Large leg cargo pockets, hand pockets, arm pocket, and large chest pocket
  • Goggle Care: Chest pocket with integrated goggle wipe cloth and internal mesh goggle pocket
  • Additional Details: Webbing daisy chain on chest
  • Cuff Design: Angled cuffs with Lycra hand cuffs and heavy-duty sleeve straps
  • Graphics: Woven chest badge with raised silicon, large back shoulder print, and thigh/shoulder prints
Materials & Compliance
What We're Built On

We're a small crew from the north, started by a few folks who believe in building honest gear for our community.

"Every piece of apparel we sell helps us put money back where it matters: into the small towns and rural communities where we all live and ride."

Thanks for being a part of it.

Owned by The Community

Proudly backed by locals and riders, not big-money investors

Honest, Purpose-Built Gear

Durable equipment that simply works, no frills attached

A Purchase with a Purpose

Every piece of gear sold helps us invest back into our communities

Bone Dry, No Matter What

We don't gamble with the weather. The Sympatex 45k membrane is top-of-the-line tech that keeps the wet stuff out while breathing harder the more you work. It’s windproof, waterproof, and built to handle the kind of days where most folks stay inside by the fire.

Submarine-Grade Protection

We added a Fidlock hermetic pocket that seals itself hermetically the second you let go. It’s waterproof down to 30 meters—which is way deeper than any sled belongs. It’s the ultimate safe zone for your electronics, keeping them bone dry even when you’re buried in the deepest powder or caught in a spring downpour.

Room to breathe

Everyone has a different setup for helmets and layering, but that expandable collar is about more than just a comfortable fit. It’s a key tool for regulating your heat when the riding gets intense. By unzipping it, you create instant airflow and better breathability. It gives you that extra space to breathe and stay dry, while still keeping the wind from biting when you’re pinned across a lake.

Tough as Nails

We didn’t just slap some Cordura on the high-wear areas like everyone else. We went all in. The entire main fabric is heavy-duty Cordura, built to take a beating and last for years while still being engineered to move with you. It’s honest, rugged protection that doesn't quit.

Dump Heat on Demand

Digging out a stuck sled is part of the game, but soaking your base layers in sweat shouldn't be. Our mesh-lined vents are strategically placed and easy to reach, letting you dump heat fast when things get intense so you stay dry from the inside out.

Hardware That Holds Up

We don't believe in cutting corners on the small stuff. All our external openings are fitted with YKK Aquaguard waterproof zippers. They’re built to keep the slush and snow on the outside where it belongs, even when you're carving through the deep stuff or getting caught in a spring rain.

The Sled-Break Setup

Our internal harness is there to make sure the bottom half of your gear stays locked in place and never gets in the way of your movement. When it’s time to air out or grab a wrench, the dedicated neck loop allows you to secure the shell to the harness. It keeps the top half held up and off the ground, so you don't have to worry about your gear dragging in the snow or grease.

Taking the Edge Off

Hard surfaces and stray knocks can be unforgiving on the knees. We’ve tucked thin EVA foam guards into dedicated internal pockets to take the sting out of those small bumps and jars. They aren't meant to be heavy-duty armor, but they provide that extra bit of comfort exactly where you need it most.

The Killswitch Solution

Stepping off the sled to help a buddy or scout a line shouldn't be a hassle. We added a Fidlock buckle with an integrated carabiner so you can easily hang your killswitch tether on your body. It’s one of those simple, honest solutions that just makes sense when you're out there.

Overkill Where It Counts

We believe in building gear that lasts longer than a single season. That’s why we’ve armored the knees and inner cuffs with Kevlar, delivering legendary toughness precisely where your gear meets the machine. It’s the kind of overkill that makes a real difference when you’re pushing through the brush.

Crystal Clear Vision

Nothing ruins a good line like a foggy or snow-covered lens. We’ve tucked a dedicated goggle wipe into one of the chest pockets so it’s right there when you need it. It’s a simple addition, because seeing where you're going is kind of a big deal.

A Home for Your Vitals

Some gear is too important to just rattle around in any pocket. We’ve included dedicated internal pockets with a secure carabiner for your transceiver and other essentials. It’s about knowing exactly where your most important tools are when the adventure gets real.

Honest. Durable. Purpose-built.